Home > Hard Drive > BSOD After Adding 1 Ssd And 1 HDD (I Have Also Formatted All HDDs)

BSOD After Adding 1 Ssd And 1 HDD (I Have Also Formatted All HDDs)

Contents

old Ubuntu 10.04LTS on HDD New Mobo + CPU + GPU and New HDD + Old HDD and New OS(Windows 10) can i use old hdd with new mobo solved Old This lists all PCI devices. Can you please help me to solve this problem that I could recover some data? I tried different connecters and different sata ports in my MB. http://openfeedback.org/hard-drive/two-internal-hdds.php

I have attempted to click the C300 and begin the Windows 7 install, but it hangs anytime I attempt to start. Upon finishing, I went to various manufacturers' website to get latest drivers for motherboard, video card, etc. (including restarts and such) and then shut down for the day. Plug and play announced ‘New Maxtor Hardware found' but the balloon didn't stick around to play? Enter your system BIOS and change your hard drive boot priority to start with your RAID drive. http://www.sevenforums.com/bsod-help-support/355100-bsod-after-adding-1-ssd-1-hdd-i-have-also-formatted-all-hdds.html

Using Old Hard Drive With New Motherboard

You can have 1 drive (the SSD) as a OS/Program drive (boot), and then have 2 (or more) in RAID as storage.If you have a SSD, and the ports are set I think that they must only keep track of the activation for a certain period of time and then you start the clock again. How important would it be to reset the CMOS?

  • i tried in another PC, had swapped every cable and tried in several OS..but result it same… is there anything with the harddisk logic card or its firmware??
  • I would think the Bios would show the new hard drive.
  • Y0GINov 10, 2013, 10:51 PM Stealth2668 said: I tried out the Belarc Advisor (neat program) and it listed my product keys for various programs.
  • WELL TO ME EVERYTHING THAT CANNOT HAPPEN DOES!!!!!
  • I am attaching my ZIP file herewith.
  • A mechanical problem with the hard drive usually manifests itself in grinding or squeaking noises, random crashes or data loss.
  • But it has the WRONG device drivers now!
  • I have changed the cell of motherboard and reset the bios but still no positivity.
  • In the most common situation I can imagine for most of us, you will need access to your files, and it may be a few days (or weeks) before you can

I apologize for not following the instructions correctly before. Then it will ask me to put the Win 8 CD in because it will know there's a new mobo paired with my old HDD correct? BSOD after adding 1 ssd and 1 HDD (I have also formatted all HDDs and reinstalled Windows 7 Ultimate x64). Change Motherboard Without Reinstalling Windows 7 Is this a HDD failure or a software issue??

Prerequisites: You must have the hard drives you will be using in your RAID, a different hard drive with your current Windows 7 installation, and an external hard drive for an Can I Put My Hard Drive In Another Computer It might see the second drive that Windows missed. The OS has been stable for a couple of years, and the only things that could have caused it that I can think of are: 1. How to use a SSD for a boot drive and a HDD as storage?

BUT make sure first that all the old stuff you want is safely stored somewhere else! Adding Old Hard Drive To New Computer For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: * 322756 How to back To The Forums! I.4 OS Windows 7 Ult.

Can I Put My Hard Drive In Another Computer

Older Hard Drive Does Not Show Up In BIOS If you had an existing drive and it and hard drive does not show up in BIOS anymore, the drive is probably http://www.tomshardware.com/forum/265977-32-boot-drive-raid-storage-setup I would definitely make sure you have a powerful, name-brand PSU in the system. Using Old Hard Drive With New Motherboard With that said, a new hard drive will set you back almost $200 these days. New Motherboard Old Hard Drive Windows 10 Then you can choose which drives you want for which RAID setup.NOTE: not all drives need to be part of a RAID array!

THEN you need to go into BIOS Setup as you boot to make sure that the Boor Priority Sequence is set to use that optical drive first, and the old HDD http://openfeedback.org/hard-drive/ntfs-formatted-hdd-shows-up-as-unallocated-space-after-i-p-shutdown.php See this video comparing a striped array setup through various ways. You can try plugging it into a different SATA port on the motherboard, or maybe try swapping the power connected and cable with another SATA device (like the DVD drive) and So the way I would do it would be to firstly, Format both drives. If I Replace My Motherboard Will Windows 10 Still Work

The archive program “7-Zip” available from http://www.7-zip.org/ installed. I am doing this with a new setup on an ASUS Sabertooth x58 board with an Intel ICH10R SATAII controller and a Marvell SATAIII controller. You will then get the windows-7 drivers which will properly pass on the trim commands. this contact form Either load the system repair option or boot off your Windows 7 install disc.

When the computer boots up, Windows 7 will install the AHCI drivers automatically. Install Old Hard Drive In New Computer When it's done and you are all ready to wipe all the old data off, you must be sure the BIOS Setup system is adjusted to boot first from the optical Now it isn't detected.

Why use Windows instead of the Chipset?

I plugged the SSD back in before booting up. Speed thru the Marvell controller were faster with the Microsoft generic drivers, than with the Manufacter controllers. All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get If I Replace My Motherboard Will I Lose My Data I have been having odd problems for a while, such as drive detection and boot sometimes fails when USB devices are plugged into the mobo… Could it be that some electrical

Change the BIOS back to IDE mode. So I downloaded a bios from DELL for this machine. My Seagate 500 GB SATA hard drive is also not found in BIOS but the drive is spinning properly. http://openfeedback.org/hard-drive/windows-7-setup-won-t-recognise-any-hdds.php Any other tips for bios conig or updating the drive would be appreciated.

Will allow you to daul boot (using F12) untill your satisfied the SSD is set up properly. Ok this post is getting a bit long now, please I desperately need advise. Restart your computer. permalinkembedsaveparentgive gold[–]jamvanderloeff 1 point2 points3 points 1 year ago(2 children)UEFI supports larger hard drives, and is the replacement for old BIOS style booting.

Thanks July 4, 2012 Dave Hard drives can be taxing on a system when they first spin up. Or am I doing something wrong? You should be able to "add" this driver furing the Win 7 install, when it askes you where to install the OS.This is, of course, if that's is where you had Best answer PaperdocNov 12, 2013, 5:24 AM OP, some points from your post of Nov 9.1.

HUH! Disconnect your main Windows 7 from your system before to install a fresh copy of Windows 7 on the spare hard drive. Went to My Computer there was still no F: Drive but the C: Drive properties showed both drives listed… only I couldn't figure our how to access the second drive and I have read on Crucial's forums a bit about people configuring the C300 on the Intel controller and then moving it to the marvell controller after it's set up, but don't

The BIOS picked it up, and I was able to see everything on Windows 7. Get your motherboard drivers downloaded from the manufacturer’s website. June 11, 2012 Steve Hi Dave, I have a Seagate SATA2 HDD that I've been using for 4.5 yrs trouble-free until last week I get a BSOD turning computer back on If you have questions why a hard drive does not show up in BIOS or in Windows, join our forums or read our other hardware tutorials for more information.

Receive

There may be multiple volumes depending on how you setup your drive initially. BuildAPC Beginner's Guide Chat on our IRC channel Daily Simple Questions threads Please keep in mind that we are here to help you build a computer, not to build it for Can someone confirm my assumption. te100Jan 27, 2013, 4:33 AM if you just want to format it then you can just hook it up to your pc as an extra hd it will show up as