Home > Hard Drive > Win 7 Hangs On Load Up After Reattaching My 2nd Sata Drive

Win 7 Hangs On Load Up After Reattaching My 2nd Sata Drive


My first disk Hitachi is ok April 2, 2012 Jane hi dave i have 2 HD connected. However when I started working the problem originally, I left both of my SATA drives plugged in and ONE of them (the data drive) WAS recognized by the BIOS. –Kevin Sep USB is much slower than internal. I am not talking about boot order but how BIOS sees the second drive (boot order is just a part of this) and how it is configured to operate as mentioned http://openfeedback.org/hard-drive/is-it-ok-to-attach-sata-hd-while-computer-running.php

Do you have a Windows XP disk? TVeblen View Public Profile Find More Posts by TVeblen 17 Nov 2013 #4 n4cerr win 7 home 64 bit premium 3 posts The C:/ drive is a dead If you must update your BIOS, go to the newest version, it will have all previous fixes in it. But follow up on the BIOS advice that I, and others, have suggested first - before you go to the trouble of an RMA swap; to rule out a mismatch with

Windows Won't Boot With Second Hard Drive

I always recommend updating an older computer if it is within your budget. So I am not sure if the infection messed with BIOS or it is something else. Report • #10 OtheHill March 29, 2011 at 15:30:04 If you use the freezer method the drive could stop at any time. March 6, 2012 Brian I have a secondary Seagate internal terabyte drive that I am using for media storage.

I am thinking that my computer is attempting to start the drive, but eventually fails (even though BIOS recognized it beforehand) and then starts Knoppix and the drive just isn't there.I You might find only one hard drive option in the boot priority list. Thank you August 22, 2012 Dave Do you have another hdd you can test on that board? Installed A New Hard Drive Now Computer Won't Turn On The hard drive was a 250 GB and it died so I replaced it with a new hard drive which is 1 TB.

I tested it a couple of times and same thing. accidentally snatched from usb port with my foot and it only shows 500gb now. Not the answer you're looking for? Maybe someone else will have an idea that can help.

Your cache administrator is webmaster. Windows Won't Boot Without Second Hard Drive i have acer and i have vista October 22, 2009 Dave Becasue it is stating "No Hard Drive Detected" I am concerned your drive might be failing. Printing out the instructions and checking them off step by step is what I do, and I have been building/maintaining computers since 1978... I accept no responsibility for any damage to your hardware as a result of this tip.

Installed New Hard Drive Windows Won't Boot

That can be a head problem. If I go into the RAID option and start to create a RAID array, it tells me that all data will be lost on the disks. Windows Won't Boot With Second Hard Drive Does the second drive show up in the boot-up summary screen? Computer Won't Power On With Hard Drive Plugged In As RetiredChief said and as I saw with the power calculator tool, each HDD uses no more than 10W...2) I'm familiar with electronics and I understand that waiting 10 seconds to

Report • Start a discussion Ask Your QuestionEnter more details...Thousands of users waiting to help!Ask now Weekly Poll Do you think 5G will replace cable and satellite? useful reference Or if it's an IDE drive a=have you tried hooking it up to the secondary IDE controller? July 12, 2012 mahesh Thanks Dave, The drive is spinning. May 25, 2012 Sony after Hanging my pc (windows7 32 bit). Installed New Hard Drive And It Wont Boot

Below is a link that gives some reasons for a code 10 error.I suspect the drive is not spinning up fast enough. If so, I would check to make sure the motherboard drivers are loaded. If this doesn't work, you can try going to the manufacturer's website and get the breakdown of Sectors, Cylinders, etc and manually input the figures. my review here If you do flash the BIOS do it through the BIOS flash utility program.

So I suspect this is my problem. Windows 7 Won't Boot With Second Hard Drive Usually this results in a short freeze after which everything works fine again. It didn't fix the issue, but it did help me narrow things down the slightest bit.I just tried a Knoppix live CD with testdisk at your recommendation, but it doesn't recognize

Thanks for your free work in here.

Works alright though. Win7 64-bit is installed and running fine. xD haha. Pc Won't Boot From Hard Drive Have you tried to let the computer run for AT LEAST three minutes to see if it continues?

There was a brief period of a couple of days after reformatting when everything was fine, so somehow I doubt it's any of those issues too. mickygsOct 7, 2015, 7:16 AM artart00 said: Hello again and thank you for your swift replies!sofaMonster: Indeed SATA drives don't need the master/slave distinction and I made sure to set the Ok, went out and bought an OCZ SATA3 SSD for primary boot drive, as well as a WD SATA3 HDD as storage drive. http://openfeedback.org/hard-drive/clean-install-of-win7-won-t-detect-sata-hdd-drivers-updated.php Download Hardware Monitor, install it and open it up.Look at voltages (primarily the +5V and the +12V).

I hope this list will help. The thing is when I go into my setup there is no option to fix that. I suspect this may work because you stated the BIOS sees the drive intermittently. I am still unable to get a solution from anybody.

I had a Seagate 1TB and a 2TB WD Green. SATA drives are hot swappable so you could try connecting the power cable only, and booting. Zero sum covers How do you develop software without acceptance criteria? I plug the new hdd to powersorce and sata socket and when i turn on the pc i can feel it runing, but when i enter in device manager i see

HomeHardwareHard Drive Does Not Show Up In BIOS Hardware Hard Drive Does Not Show Up In BIOS If your hard drive does not show up in BIOS of the computer, it There wasn't the initial boot-up beep and the screen was blank. Turned off computer, pulled the SATA cable and plugged it back in. PDA View Full Version : [SOLVED] Cannot enter bios when second sata hard drive is connected !!

I have been having odd problems for a while, such as drive detection and boot sometimes fails when USB devices are plugged into the mobo… Could it be that some electrical But when it is disconnected it gets passed through easily. where do I go from here; I was thinking trying a new hdd (price is about $70) and then install the recovery disks if the HDD works OK. Get it at the link below.http://www.piriform.com/recuva Report • #11 jefro March 30, 2011 at 14:00:47 Hummm, I said don't use knoppix.

Read ALL the instructions on your MB maker's website BEFORE you do the upgrade. Is it a new drive? Your drive is almost certainly DOA (Dead on Arrival).